REFLECTOR: PUSHER PROP

Jmbmitch33 Jmbmitch33 at comcast.net
Sun Nov 8 11:55:11 CST 2009


Speaking of....Im still looking for another MT 3 or 4 blade, hydraulic Prop....possible used or re-conditioned.  Anyone know of any leads?? ((been checking barnstormers..etc with no luck.... Anyone got another web site that might not be as popular?
 
  ----- Original Message ----- 
  From: Lou Stedman 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Sunday, November 08, 2009 3:49 PM
  Subject: Re: REFLECTOR: PUSHER PROP


  I agree. 15K for 8 knots? 
    ----- Original Message ----- 
    From: Andrew Ellzey 
    To: Velocity Aircraft Owners and Builders list 
    Sent: Sunday, November 08, 2009 6:38 AM
    Subject: Re: REFLECTOR: PUSHER PROP


    Thats a lot of money to spend for a prop.

    Andy




----------------------------------------------------------------------------
    From: Rene Dugas <dugasd at bellsouth.net>
    To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
    Sent: Sat, November 7, 2009 5:33:29 PM
    Subject: Re: REFLECTOR: PUSHER PROP


    I think mine was 15 k. Lead was 4 months years ago. Gained 500 ft min climb and 8 knot at cruise. Blade cross section is much thinner and blades are MUCH STONGER.   I'm very pleased. I am unaware of specific testing for harmonics with my io 540 260 hp. 


    Rene' Dugas
    Sent from my iPhone 3GS 



    On Nov 7, 2009, at 5:26 PM, Andrew Ellzey <ajlz72756 at yahoo.com> wrote:


      Rene,

      How much is a hydraulic AeroComposite prop for an XLRG 300hp IO540, and what is the normal lead time for delivery? Is the cruse speeds comparable to the MT. Has anyone done a harmonic vibration analysis on this prop airframe combination.

      Andy Ellzey




--------------------------------------------------------------------------
      From: Rene Dugas <dugasd at bellsouth.net>
      To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
      Sent: Wed, November 4, 2009 7:12:30 PM
      Subject: Re: REFLECTOR: PUSHER PROP


      I did the reverse.

      Rene’

      pics



      From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Darrell & Nora Kufalk
      Sent: Wednesday, November 04, 2009 5:02 PM
      To: Velocity Aircraft Owners and Builders list
      Subject: Re: REFLECTOR: PUSHER PROP



      I like my AeroComposites prop so much, I painted my entire airplane to match it.  :)



      110 hours and going strong.

      Darrell





        ----- Original Message ----- 

        From: Rene Dugas 

        To: 'Velocity Aircraft Owners and Builders list' 

        Sent: Wednesday, November 04, 2009 2:08 PM

        Subject: Re: REFLECTOR: PUSHER PROP



        Love my AeroComposite.  Please consider one.

        Rene’



        From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Jmbmitch33
        Sent: Wednesday, November 04, 2009 9:12 AM
        To: Velocity Aircraft Owners and Builders list
        Subject: Re: REFLECTOR: PUSHER PROP



        I need a hydrolic MT and the MT that I was using has been working fine for just over 500+ hours.  If yours is hydrolic, what would you take for me to sweep it off your floor??..lol.  I would like to call you if you could give me your number...



        Thanks

        Mitch

          ----- Original Message ----- 

          From: HYTEC45 at aol.com 

          To: reflector at tvbf.org 

          Sent: Wednesday, November 04, 2009 9:59 AM

          Subject: Re: REFLECTOR: PUSHER PROP



          In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time, Jmbmitch33 at comcast.net writes:

            Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any advice on where to look without breaking the bank?......Or, does anyone have another brand they like other than MT??



            Thanks

            M.Brown

          What type, electric or hydraulic?  Is the engine counterweighted?  I have invested over 18K in my mt for my IO-360-C1C over the past 8 years with still no workable prop.  It sits again on my hanger floor fresh from overhaul with new blades and that is where it will stay.  Even though it's zero time at this point, I could not sleep at night pushing it off on someone.  I have come to the conclusion that the 180' firing pulses on the 360 (200hp) without counterweights are to violent for the bearing/seal design of the mt as this is what fails after approximately 40-50 hours.

          Run Forest; Run!!

          A friend with a cozy running a IO-360 is running the Aerocomposit with good results.

          FYI,

          TEC


----------------------------------------------------------------------

          _______________________________________________
          To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

          Visit the gallery!  www.tvbf.org/gallery
          user:pw = tvbf:jamaicangoose
          Check new archives: www.tvbf.org/pipermail
          Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



        CyberDefender has scanned this email for potential threats.
        Version 2.0 / Build 4.03.29.01
        Get free PC security at http://www.cyberdefender.com


------------------------------------------------------------------------

        _______________________________________________
        To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

        Visit the gallery!  www.tvbf.org/gallery
        user:pw = tvbf:jamaicangoose
        Check new archives: www.tvbf.org/pipermail
        Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



      CyberDefender has scanned this email for potential threats.
      Version 2.0 / Build 4.03.29.01
      Get free PC security at http://www.cyberdefender.com 

      _______________________________________________
      To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

      Visit the gallery!  www.tvbf.org/gallery
      user:pw = tvbf:jamaicangoose
      Check new archives: www.tvbf.org/pipermail
      Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


----------------------------------------------------------------------------


    _______________________________________________
    To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

    Visit the gallery!  www.tvbf.org/gallery
    user:pw = tvbf:jamaicangoose
    Check new archives: www.tvbf.org/pipermail
    Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 


----------------------------------------------------------------------------



    No virus found in this incoming message.
    Checked by AVG - www.avg.com 
    Version: 8.5.425 / Virus Database: 270.14.55/2489 - Release Date: 11/08/09 07:37:00



------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091108/f747a4f3/attachment-0001.htm>


More information about the Reflector mailing list