REFLECTOR: 6 lead cable

[Andrew Ellzey]

I am installing a Blue Mountain EFIS one and am using their wiring harness which is standard 24 awg wire. I called BM and asked about why they were using non-thermocouple wire and would their harness work. BM replied that it would work just fine. I'm not flying yet and haven't installed my CHT or EGT wiring to my BM yet so I can't confirm any results. I'm not sure about the unit that you are installing, but BM is fully adjustable and should allow me to compensate for any problems found by using standard wire.

Andy Ellzey




________________________________
From: "aminetech at bluefrog.com" <aminetech at bluefrog.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wednesday, March 11, 2009 9:34:50 AM
Subject: Re: REFLECTOR: 6 lead cable


Thanks.  That answered my next question, if I could use non-thermocouple wire.  Since I'm not sure which type I have, this is the easiest route.

John

--- ajlz72756 at yahoo.com wrote:

From: Andrew Ellzey <ajlz72756 at yahoo.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Subject: Re: REFLECTOR: 6 lead cable
Date: Wed, 11 Mar 2009 05:16:11 -0700 (PDT)


  
  
10 CONDUCTOR GRAY CODE TEFZEL WIRE 
Excellent for carrying gray code information from the encoder to other devices that take gray code input such as transponder, Garmin 430 GPS, serializer etc. Instead of running individual 24AWG wirs and running thm in a bundle, use this handy all in one, color coded, 10 conductor cable, saving time and effort. Sold in 1' increments.    
Description Part No. Price Buy 
10 CONDUCTOR GRY CODE TEF WIRE 11-04479 $3.35    
http://www.aircraftspruce.com/catalog/elpages/edmograytefzel.php




________________________________
From: "aminetech at bluefrog.com" <aminetech at bluefrog.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Tuesday, March 10, 2009 6:34:33 PM
Subject: REFLECTOR: 6 lead cable


I wired in a new socket for my RMI monitor.  That fixed all the problems EXCEPT 'my CHT which is the main reason for replacing it. I can't get to the wires that go from the engine compartment to the panel, so I plan to run new wires.  Anyone know where I can get a 6 lead bundle?

John_______________________________________________ To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check new archives: www.tvbf.org/pipermail Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090311/6fc2f4fe/attachment.htm>