REFLECTOR: Moving my roll servo.

[nmflyer1 at aol.com]

I put mine right behind the Keel Fin on the pilot side. I made a dam out of cardboard, and filled it with pourfoam to make a pad, Then I put a 3.8" thick piece of wood on top of that with nuts epoxied into the base. Then I glassed over that making a nice hard point to mount the servo to. 

It is tight, but it fits and installs directly to the bell crank behind the keel. Didn't lose any legroom, just filled up another cubby hole. 

?I can probably take a pic of it if you like. 

Kurt 


-----Original Message-----
From: Douglas Holub <douglas.holub at gmail.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Fri, 12 Jun 2009 9:21 pm
Subject: Re: REFLECTOR: Moving my roll servo.


On my plane there's a front seat bulkhead and the bell crank comes out just behind it. The servo tucks in very nicely there, and it's working great. Something similar might work behind the back seats in planes with a keel.?
?
Doug Holub?
----- Original Message ----- From: "Scott Derrick" <scott at tnstaafl.net>?
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>?
Sent: Friday, June 12, 2009 9:55 PM?
Subject: REFLECTOR: Moving my roll servo.?
?
> _______________________________________________?
> To change your email address, visit > http://www.tvbf.org/mailman/listinfo/reflector?
>?
> Visit the gallery! www.tvbf.org/gallery?
> user:pw = tvbf:jamaicangoose?
> Check new archives: www.tvbf.org/pipermail?
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 


_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



[Image Removed] 


[Image Removed] 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090613/251c18f6/attachment.htm>