REFLECTOR: Lord Mounts

[davedent at comcast.net]

When it comes to engine mounts I have always torque the 7/16" bolts to 38ft lbs and have had very good success with them.  It looks like your mount bolt is not torque correctly.  But may be just fine.  Just torque them to 38lbs and they should be OK. Make sure you bolts are not bottomed out.  Like being to long.  Also that the spacer is also installed. 

Remember also that most rubber products get harder with age.  In the environment that our engines run in I wouldn't keep them more then eight years.  Even less it they start cracking.  

Believe me there is a difference between manufactures of mounts as well.  You get what you pay for. 

Also keep solvents and oils away from them and keep them clean.  The harder they get the less effective they are and so being more damage is done to the rest of the plane. Don't take rubber mounts lightly. They do a lot more then just hold the engine in place.  
Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080908/cf2fc440/attachment.htm