REFLECTOR: Mishler Nosewheel Lock System

[John Tvedte]

I just received my order from Vibrationmounts.com.

Looks like they have Qty 18 available - V10Z 7-1011 on their online store.
________________________________
From: reflector-bounces at tvbf.org [reflector-bounces at tvbf.org] On Behalf Of nmflyer1 at aol.com [nmflyer1 at aol.com]
Sent: Sunday, December 07, 2008 3:03 PM
To: reflector at tvbf.org
Subject: Re: REFLECTOR: Mishler Nosewheel Lock System

Last I heard, the supplier was out of the "new style" rubber shock things. I called several times and asked them to call me when they made some more. I have not received a call back. Is there a supply of the new style mounts anywhere?

Kurt



-----Original Message-----
From: Stockman, Bill <bill.stockman at daytonaero.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Sun, 7 Dec 2008 1:49 pm
Subject: Re: REFLECTOR: Mishler Nosewheel Lock System


Tom

You still need to check the shock mount on the firewall.   If the shimmy was as
bad as you suggest, then
you  probably bent the metal cover plate and future landings may be even more
exciting in the future even with the nose gear lock.     You should serious
consider changing to the new rubber shock mount along with the nose wheel lock.



________________________________

From: reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org> on behalf of Tom
Sent: Sun 12/7/2008 11:29 AM
To: reflector at tvbf.org<mailto:reflector at tvbf.org>
Subject: REFLECTOR: Mishler Nosewheel Lock System



Thx Chuck, I sent Ken an email to order one. In interim I dug through
the builders plans and was able to get leg fairing off for repair and to
check the bumper/shock. Looks like my problem was where I was measuring
pivotal nosewheel tightness. I was listening to all of the local RV guys
and measuring pull force at the axle. The Velo plans say to measure
further out on the arm at the back of the tire. I had 16lbs pull at the
axle but only 10lbs at the tire. Had flown about 150 hrs like this with
no problem until I put a lot more air in my front tire. Was using 20lbs
but upped it to 35. Even at that I had made about 10 landings with no
problems until a 90 degree 15 knot crosswind. Greased the mains on and
held the nosewheel off till it slowed, wind must have weathercocked the
nosewheel fairing and it was not pretty when it touched down. I pulled
back hard and then planted it again and it straightened out. Got away
with some very minor glass damage on the fairings. Lucky..Tom
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


________________________________
Listen to 350+ music, sports, & news radio stations – including songs for the holidays – FREE while you browse. Start Listening Now<http://toolbar.aol.com/aolradio/download.html?ncid=emlweusdown00000013>!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20081207/02fe97df/attachment.htm