Mail Index

• Thread Index

• Re: Elite
  • From: HYTEC45 <HYTEC45@aol.com>
• Lycoming Bible (Condensed Version)
  • From: "Donald R. WHITE" <donaldwhite@compuserve.com>
• Trim
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Franklin Fuel Pumps.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Wondering
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Franklin Fuel Pumps.
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Elevator trim
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Franklin Fuel Pumps.
  • From: ncalvin@primenet.com (nate calvin)
• Re: Engine install
  • From: ncalvin@primenet.com (nate calvin)
• Re: Trim
  • From: HYTEC45 <HYTEC45@aol.com>
• Re: Trim
  • From: Clint Spooner <SCS@nixonvan.com>
• A different fuse.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Re: Trim
  • From: HYTEC45 <HYTEC45@aol.com>
• Re: A different fuse.
  • From: "Brian K. Michalk" <michalk@awpi.com>
• RE: A different Fuse
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Installing a real air filter in a 173
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: Wondering
  • From: "James K. Glindemann" <jglind@netspace.net.au>
• Re: A different fuse.
  • From: "James K. Glindemann" <jglind@netspace.net.au>
• Engines
  • From: NMFlyer1 <NMFlyer1@aol.com>
• Altitude hold
  • From: Alan Shaw <wingco@iu.net>
• Re: Engines
  • From: "Brian K. Michalk" <michalk@awpi.com>
• More on fuses.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Re: Engines
  • From: Dave Black <asterisk@idsonline.com>
• Sun n' Fun
  • From: Milton Mersky <miltonm@onramp.net>
• Re: More on fuses.
  • From: "William Wade" <billwade@Concentric.net>
• Re: Sun n' Fun
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: Engines
  • From: Terri Jo Stockman <tstockmn@erols.com>
• Fuel System
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Engines
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Franklin Fuel Pumps.
  • From: mhadley1@juno.com
• Fuses
  • From: mhadley1@juno.com
• Engines
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: More on fuses.
  • From: "William Wade" <billwade@Concentric.net>
• Engine choice.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Fuse, again.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Pull breaker.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• RE: Engines
  • From: "Ralph Robertson" <rrob@dwave.net>
• Re: Fuses
  • From: Dave Black <asterisk@idsonline.com>
• Engines
  • From: CHUCK173RG <CHUCK173RG@aol.com>
• Re: Engines
  • From: David Doshay <ddoshay@cisco.com>
• Re: Fuses
  • From: Dave Scharfenberg <dave@netins.net>
• Re: Fuses
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: Engines
  • From: mhadley1@juno.com
• Re: Fuses
  • From: mhadley1@juno.com
• Re: [canard-aviators] Wing Attach Bolts
  • From: "William Wade" <billwade@Concentric.net>
• Re: engines
  • From: David Doshay <ddoshay@cisco.com>
• pressure switches
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Pressure Switches and Air yucks
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Engine chioce
  • From: "Teitsma, Jerry" <roofsyst@stc.net>
• RE: Engine chioce
  • From: Travis Young <TravisY@Applebees.com>
• pressure switches
  • From: "Al Gietzen" <alventures@email.msn.com>
• RE: Franklin Fuel Pumps.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Matco brakes?
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• Re: Matco brakes?
  • From: mhadley1@juno.com
• Pressure Switches
  • From: mhadley1@juno.com
• Re: Pressure Switches
  • From: Dave Black <asterisk@idsonline.com>
• Re: Pressure Switches
  • From: "Brian K. Michalk" <michalk@awpi.com>
• RE: Matco brakes?
  • From: Travis Young <TravisY@Applebees.com>
• Re: Pressure Switches
  • From: Dave Black <asterisk@idsonline.com>
• Weight of Completed Planes
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Weight of Completed Planes
  • From: Dave Black <asterisk@idsonline.com>
• Re: SWR meter
  • From: "William Wade" <billwade@Concentric.net>
• Re: Pressure Switches
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: Weight of Completed Planes
  • From: DAlexan424 <DAlexan424@aol.com>
• Weights
  • From: Joe Connally <connally@airmail.net>
• Wheel weights.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• SWR Meter.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Re: Pressure Switches
  • From: mhadley1@juno.com
• Re: SWR meter
  • From: mhadley1@juno.com
• N81VA
  • From: mhadley1@juno.com
• weights
  • From: mhadley1@juno.com
• Re: Wheel weights.
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Weight of Completed Planes
  • From: DAlexan424 <DAlexan424@aol.com>
• (no subject)
  • From: Joe Connally <connally@airmail.net>
• [Fwd: Re: weights]
  • From: Carl Hoffman <hoffman3@erols.com>
• Sun N Fun 98
  • From: mhadley1@juno.com
• New Mexico Trip Maintenance: Starter, Ivo Motor, & Nose Wheel
  • From: lavoie <lavoie@aug.com>
• Exhaust stack
  • From: David Brown <velcty@earthlink.net>
• Back in town
  • From: "Brian K. Michalk" <michalk@awpi.com>
• N234Q
  • From: Dave Black <asterisk@idsonline.com>
• Re: N234Q
  • From: David Brown <velcty@earthlink.net>
• Re: N234Q
  • From: Greg.Otto@cyrix.com
• 234Q Crash
  • From: David Brown <velcty@earthlink.net>
• Re: Velocity New builder.
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Velocity New builder.
  • From: Carl Hoffman <hoffman3@erols.com>
• Plane loaded with marijuanna craches
  • From: Carl Hoffman <hoffman3@erols.com>
• Warranty cards are in these days .....
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• Re: Exhaust stack
  • From: tvallee <pwetmor@ibm.net>
• I suggest this change...
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: I suggest this change...
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Exhaust stack
  • From: HYTEC45 <HYTEC45@aol.com>
• Re: I suggest this change...
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Velocity New builder.
  • From: Alan Shaw <wingco@iu.net>
• winglet lower extensions?
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• RE: Fuel Tank Sizes
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• Velocity 173 for FS 95
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• Re: Velocity 173 for FS 95
  • From: "Rich & Lisa Maurer" <rlmaurer@swconnect.net>
• RE: Velocity 173 for FS 95
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• new member
  • From: "Mid America Sales" <masa@psci.net>
• First flight and weights
  • From: "Rob Morgan" <morgan_rob@hotmail.com>
• Re: Velocity 173 for FS 95
  • From: Alan Shaw <wingco@iu.net>
• Re: Fuel Tank Sizes
  • From: Alan Shaw <wingco@iu.net>
• Re: winglet lower extensions?
  • From: Alan Shaw <wingco@iu.net>
• Strikefinders
  • From: MelBina <MelBina@aol.com>
• Re: Strikefinders
  • From: PenningSP <PenningSP@aol.com>
• Re: Strikefinders
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re:N234Q
  • From: Dave Black <asterisk@idsonline.com>
• SNF 98
  • From: mhadley1@juno.com
• Sun Shields
  • From: Milton Mersky <miltonm@onramp.net>
• Re: SNF 98
  • From: David Brown <velcty@earthlink.net>
• Re: SNF 98
  • From: mhadley1@juno.com
• strange allergy / window frames
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Canard Alignment
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Canard Alignment
  • From: "William Wade" <billwade@Concentric.net>
• Re: Canard Alignment
  • From: "Brian K. Michalk" <michalk@awpi.com>
• More manual on-line
  • From: Travis Young <TravisY@onePOS.com>
• good news and bad news
  • From: "Jean Prudhomme" <jeanprud@icanect.net>
• Re: Subscribing
  • From: "Venky's Velocity Hangar" <velocity@CC1005790-A.vron1.nj.home.com>
• 3/32" Rudder Cables
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: Canard Alignment
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Canard Alignment
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: good news and bad news
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: Canard Alignment
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: More manual on-line
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Canard Alignment
  • From: "William Wade" <billwade@Concentric.net>
• Re: Canard Alignment
  • From: "Putney, Gordon A." <GORDON.A.PUTNEY@SNAPON.COM>
• Canard alignment
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: 3/32" Rudder Cables
  • From: Alan Shaw <wingco@iu.net>
• RE: Canard alignment
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• Rudder Cables
  • From: NMFlyer1 <NMFlyer1@aol.com>
• Re: Conversion Correction
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Canard Alignment
  • From: "William Wade" <billwade@Concentric.net>
• Tempting Mother Nature
  • From: Milton Mersky <miltonm@onramp.net>
• Re: good news and bad news
  • From: mhadley1@juno.com
• Re: Canard Alignment
  • From: "Rob Morgan" <morgan_rob@hotmail.com>
• Rudder cables; Matco brakes
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Canard alignment
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: News and Mother Nature
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: just checkin' in
  • From: Dave Black <asterisk@idsonline.com>
• Re: just checkin' in
  • From: Dave Black <asterisk@idsonline.com>
• Re: Canard Alignment
  • From: Bob Ginsberg <bgins@ipass.net>
• no rudder landings
  • From: Bob Ginsberg <bgins@ipass.net>
• Which way is up?
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: News and Mother Nature Re-Post
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: just checkin' in
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: no rudder landings
  • From: JHOWARD2 <JHOWARD2@aol.com>
• Aileron wts.
  • From: rdugas@bayou.com
• RE: Re: just checkin' in
  • From: bgins@ipass.net
• Insurance
  • From: Milton Mersky <miltonm@onramp.net>
• Re: Insurance
  • From: HYTEC45 <HYTEC45@aol.com>
• Re: Aileron wts.
  • From: Alan Shaw <wingco@iu.net>
• Insurance Postings
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Batteries
  • From: "Al Gietzen" <alventures@email.msn.com>
• Rudders and brakes (breaks)
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Batteries
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: (a) no rudder landings, and, (b) which way is up?
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: (a) no rudder landings, and, (b) which way is up?
  • From: DAlexan424 <DAlexan424@aol.com>
• Rudders and brakes (breaks)
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• More on Batteries
  • From: Jeff Barnes <jcbarnes@ibm.net>
• More on Batteries 2
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Rudder Cable Incident
  • From: "Doug & Diane Doers" <ddoers@execpc.com>
• Re: Batteries
  • From: mhadley1@juno.com
• Re: Rudders and brakes (breaks)
  • From: mhadley1@juno.com
• Re: Rudders and brakes (breaks)
  • From: Alan Shaw <wingco@iu.net>
• Alignment
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Batteries
  • From: "Al Gietzen" <alventures@email.msn.com>
• seat upolstery thickness
  • From: "Mid America Sales" <masa@psci.net>
• Re: Rudders and brakes (breaks)
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Rudders and brakes (breaks)
  • From: mhadley1@juno.com
• Re: Rudders and brakes (breaks)
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Rudders and brakes (breaks)
  • From: Dave Black <asterisk@idsonline.com>
• No Subject
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• re:upholstery
  • From: "Simon Aegerter [KPIE]" <100256.3710@compuserve.com>
• Re: Rudders and brakes (breaks)
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: Batteries
  • From: dmp@tmedbsd.mcg.edu
• new location
  • From: Milton Mersky <miltonm@onramp.net>
• SERG question.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Instr.Panel instl.
  • From: bgamm11@juno.com (Robert C Gammon)
• Re: Rudders and brakes (breaks)
  • From: Alan Shaw <wingco@iu.net>
• brake/rudder
  • From: dohayes@juno.com
• Re: Rudders and brakes (breaks)
  • From: mhadley1@juno.com
• Re: Instr.Panel instl.
  • From: mhadley1@juno.com
• Strike Finder follow up.
  • From: MelBina <MelBina@aol.com>
• Other StrikeFinder Questions
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Wiring
  • From: dmp@TmedBSD.MCG.EDU
• Re: Strike Finder follow up.
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: brake/rudder
  • From: dohayes@juno.com
• Re: brake/rudder
  • From: Alan Shaw <wingco@iu.net>
• [Fwd: Re: brake/rudder]
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: [Fwd: Re: brake/rudder]
  • From: Greg.Otto@cyrix.com
• Re: Wiring
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• SVX
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Re: Strikefinder
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Rudder cables
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Other StrikeFinder Questions
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: brake/rudder
  • From: John Rourke <jpr@ix.netcom.com>
• Re: Wiring
  • From: dmp@TmedBSD.MCG.EDU
• Strikefinder
  • From: Joe Connally <connally@airmail.net>
• Re: upholstery
  • From: Mel Ball <mball@frontier.net>
• Re: Wiring
  • From: mhadley1@juno.com
• Re: Wiring
  • From: mhadley1@juno.com
• Re: Rudder cables
  • From: mhadley1@juno.com
• Re: Rudder cables
  • From: Dave Black <asterisk@idsonline.com>
• Re: Brake/Rudder
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Birdstrikes !
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Birdstrikes !
  • From: dmp@TmedBSD.MCG.EDU
• Re: Birdstrikes !
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• Re: Rudder cables
  • From: HYTEC45 <HYTEC45@aol.com>
• AIR FILTERS
  • From: DLINC65210 <DLINC65210@aol.com>
• Re: Brake/Rudder
  • From: mhadley1@juno.com
• Re: Rudder cables
  • From: "William Wade" <billwade@Concentric.net>
• Re: Brake/Rudder
  • From: Jeff Barnes <jcbarnes@ibm.net>
• [Fwd: Re: Birdstrikes !]
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Lavoie Franklin
  • From: Milton Mersky <miltonm@onramp.net>
• Rudder
  • From: rdugas@bayou.com
• Re: Rudder cables
  • From: mhadley1@juno.com
• Aileron Trim
  • From: Dave Black <asterisk@idsonline.com>
• Re: Rudder cables
  • From: "Venky's Velocity Hangar" <velocity@CC1005790-A.vron1.nj.home.com>
• Re: Rudder
  • From: Dave Black <asterisk@idsonline.com>
• Re: Rudder cables
  • From: Alan Shaw <wingco@iu.net>
• Re: Rudder
  • From: Alan Shaw <wingco@iu.net>
• Re: Rudder cables
  • From: Dave Black <asterisk@idsonline.com>
• Re: Rudder cables
  • From: dmp@TmedBSD.MCG.EDU
• Fwd: Rudder cables
  • From: HYTEC45 <HYTEC45@aol.com>
• Re:Aileron Trim
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• Aileron Hinge Attachment
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• Re: Aileron Hinge Attachment
  • From: "Brian K. Michalk" <michalk@awpi.com>
• RE: Aileron Hinge Attachment
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• Re: Aileron Trim
  • From: Dave Black <asterisk@idsonline.com>
• Re: Aileron Trim
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Pitch trim Spring
  • From: mhadley1@juno.com
• Nav Lights
  • From: rdugas@bayou.com
• Aileron / wing matching trick
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• roll trim, pitch trim
  • From: Bob Ginsberg <bgins@ipass.net>
• Whelan cables?
  • From: dmp@TmedBSD.MCG.EDU
• Re: Whelan cables?
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: Nav Lights
  • From: Alan Shaw <wingco@iu.net>
• Re: roll trim, pitch trim
  • From: jpv@vbe.com
• Re: Aileron Hinge Attachment
  • From: Travis Young <TravisY@onePOS.com>
• Re: Nav lights
  • From: "William Wade" <billwade@Concentric.net>
• RE: Aileron Hinge Attachment
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• (no subject)
  • From: rdugas@bayou.com
• Re: Aileron Hinge Attachment
  • From: "William Wade" <billwade@Concentric.net>
• Re: Nav lights
  • From: ncalvin@primenet.com (nate calvin)
• FRANKLIN ENGINE
  • From: VXPB09A@prodigy.com (MR ALLAN J LUNDEEN)
• Boundary Layer
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Excess brake travel.
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• RE: Excess brake travel.
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• Brake Lines
  • From: "Al Gietzen" <alventures@email.msn.com>
• Boundary layer
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Brake Lines
  • From: "William Wade" <billwade@Concentric.net>
• Re: Brake Lines
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: [canard-aviators] Pitot Tube
  • From: Jeff Barnes <jcbarnes@ibm.net>
• E Mail address
  • From: Milton Mersky <miltonm@onramp.net>
• Velocity West Fly-In
  • From: tvallee <pwetmor@ibm.net>
• New Member and Vwest BBQ
  • From: DAlexan424 <DAlexan424@aol.com>
• Rudder Cable Problems
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: New Member And Vwest BBQ
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Rudder Cable Problems
  • From: "William Wade" <billwade@Concentric.net>
• Re: Rudder Cable Problems
  • From: "James K. Glindemann" <jglind@netspace.net.au>
• Rudder Cable Problems
  • From: "lawrence epstein" <ljepstein@hotmail.com>
• Rudder Cable Connection
  • From: "Al Gietzen" <alventures@email.msn.com>
• Bob Nuckolls seminar
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• Velocity West Fly-In
  • From: CHUCK173RG <CHUCK173RG@aol.com>
• Re: Bob Nuckolls seminar
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Rudder Cable Problems
  • From: mhadley1@juno.com
• Re: Bob Nuckolls seminar
  • From: Jeff Barnes <jcbarnes@ibm.net>
• RE: Bob Nuckolls seminar
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• Need spring, fuel pump; oil tubes hit lower cowl
  • From: "Jay" <jayyu@email.msn.com>
• Re: Bob Nuckolls seminar
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Rudder Cable Connection
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: Bob Nuckolls seminar
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Bob Nuckolls seminar
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: Rudder Cable Connection
  • From: Alan Shaw <wingco@iu.net>
• Denis D. Miller Yonkers Velocity Builder
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Oil Cooler, air flow sealing?
  • From: "Schweitzer, Bill" <bill.schweitzer@tandem.com>
• Re: Oil Cooler, air flow sealing?
  • From: HYTEC45 <HYTEC45@aol.com>
• Re: Oil Cooler, air flow sealing?
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Oil Cooler, air flow sealing?
  • From: "Donald J. Royer" <droyer@csn.net>
• plenum paint
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Cape Cod canard fly-in
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Cape Cod canard fly-in
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: plenum paint
  • From: DAlexan424 <DAlexan424@aol.com>
• Boundary layer
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Pitot play time
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• velocityxlrg300 Good news)
  • From: "Jean Prudhomme" <jeanprud@icanect.net>
• Fw: velocityxlrg300 Good news)
  • From: "Jean Prudhomme" <jeanprud@icanect.net>
• Re: Pitot play time
  • From: Barney Moen <webmaster@calclub.com>
• Re: velocityxlrg300 Good news)
  • From: Jeff Barnes <jcbarnes@ibm.net>
• velocityslrg300yestherday message rudder cable horn attachement drawing.
  • From: "Jean Prudhomme" <jeanprud@icanect.net>
• NASA/Continental Diesel Engine - "Revoltin' Developments!"
  • From: Peter Beaty <beatyp@engg.email.dupont.com>
• Rudder horn assy
  • From: Burt Kellerman <burtvelo@home.com>
• Rudder Horn Drawing
  • From: Burt Kellerman <burtvelo@home.com>
• Re: FRANKLIIN 6A-350-C1R ENGINE
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Jean's Pics Online
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Door Fitting
  • From: "Denis D. Miller" <denism@erols.com>
• No Subject
  • From: "Ralph Robertson" <rrob@dwave.net>
• Re: FRANKLIIN 6A-350-C1R ENGINE
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re:
  • From: Dave Black <asterisk@idsonline.com>
• Re: large email files
  • From: David Doshay <ddoshay@cisco.com>
• [Fwd: Re: large email files, Hey JEAN ! Hey Bob !]
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Jean's Pics Online
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: FRANKLIIN 6A-350-C1R ENGINE
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: FRANKLIIN 6A-350-C1R ENGINE
  • From: DAlexan424 <DAlexan424@aol.com>
• Re: NASA/Continental Diesel Engine - "Revoltin' Developments!"
  • From: Peter Beaty <beatyp@engg.email.dupont.com>
• No Subject
  • From: ncalvin@primenet.com (nate calvin)
• SPECIAL!!! Jean's Pics reduced!!
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Glare Shield Length
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: Door Alignment
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Ram Pressure
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Ram Pressure
  • From: "Brian K. Michalk" <michalk@awpi.com>
• ram pressure
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: ram pressure
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: ram pressure
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• RE: ram pressure
  • From: Travis Young <TravisY@onePOS.com>
• Re: Message from Internet
  • From: ncalvin@primenet.com (nate calvin)
• Re: ram pressure
  • From: HYTEC45@aol.com
• fuel systems
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: fuel systems
  • From: DAlexan424@aol.com
• Re: ram pressure
  • From: "mikey" <masa@psci.net>
• Cape Cod fly-in notice
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: fuel systems
  • From: Greg.Otto@cyrix.com
• Autopilot and Stuff
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Departures
  • From: mhadley1@juno.com
• Pictures to down load
  • From: "Ron Needham" <roncathy@ameritech.net>
• First Flight! of Verlocity N6Q
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• RE: Pictures to down load
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• Re: First Flight! of Verlocity N6Q
  • From: mhadley1@juno.com
• Re: Autopilot and Stuff
  • From: mhadley1@juno.com
• Re: First Flight! of Verlocity N6Q
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: Autopilot and Stuff
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Autopilot and Stuff
  • From: mhadley1@juno.com
• pictures
  • From: "Ron Needham" <roncathy@ameritech.net>
• Re: Pictures to down load
  • From: "Al Gietzen" <alventures@email.msn.com>
• RE: Pictures to down load
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• Items of [possible] interest
  • From: Peter Beaty <beatyp@engg.email.dupont.com>
• First Flight Velocity N6Q
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: First Flight! of Verlocity N6Q
  • From: "ART DINICOLANTONIO" <ADINICK@worldnet.att.net>
• Fw: First Flight! of Verlocity N6Q
  • From: "ART DINICOLANTONIO" <ADINICK@worldnet.att.net>
• Oil cooler location
  • From: Alan Shaw <wingco@iu.net>
• Re: First Flight! of Verlocity N6Q
  • From: aegerter@dataway.ch (Simon Aegerter)
• Lyc. plenum vs. baffles
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• More temperatures from N6Q
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: More temperatures from N6Q
  • From: "ART DINICOLANTONIO" <ADINICK@worldnet.att.net>
• Re: Lyc. plenum
  • From: Dave Scharfenberg <dave@netins.net>
• Re: Fillers
  • From: "Al Gietzen" <alventures@email.msn.com>
• RE: First Flight Velocity N6Q
  • From: "Ralph Robertson" <rrob@dwave.net>
• Internal Rudder Horns and Winglet Layer "C"
  • From: DAlexan424@aol.com
• Re: More temperatures from N6Q
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: First Flight Velocity N6Q
  • From: Dave Black <asterisk@idsonline.com>
• engine clearance, seat belts
  • From: Bob Ginsberg <bgins@ipass.net>
• KPC's
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• fillers
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Internal Rudder Horns and Winglet Layer "C"
  • From: Alan Shaw <wingco@iu.net>
• Re: N6Q wing problem
  • From: Alan Shaw <wingco@iu.net>
• Re: First Flight Velocity N6Q
  • From: MTSP@aol.com
• RE: Internal rudder horn & layup "C"
  • From: NMFlyer1@aol.com
• fillers
  • From: NMFlyer1@aol.com
• Questions
  • From: "Al Gietzen" <alventures@email.msn.com>
• Remote mount oil filter at a reasonable price.
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Model Name
  • From: Dave Black <asterisk@idsonline.com>
• Re: Remote mount oil filter at a reasonable price.
  • From: David Brown <velcty@earthlink.net>
• RG Main Gear Overcenter
  • From: David Brown <velcty@earthlink.net>
• Re: RG Main Gear Overcenter
  • From: Dave Black <asterisk@idsonline.com>
• Re: Remote mount oil filter at a reasonable price.
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: RG Main Gear Overcenter
  • From: HYTEC45@aol.com
• RE: Oil Cooler, air flow sealing?
  • From: "Schweitzer, Bill" <bill.schweitzer@tandem.com>
• Re: Questions
  • From: mhadley1@juno.com
• Re: Questions
  • From: Alan Shaw <wingco@iu.net>
• Re: Internal Rudder Horns and Winglet Layer "C"
  • From: DAlexan424@aol.com
• Re: fillers
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: Blocks for shoulder harness
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Fillers
  • From: NMFlyer1@aol.com
• Re: More temperatures from N6Q
  • From: mhadley1@juno.com
• Re: Questions
  • From: MTSP@aol.com
• Re: fillers
  • From: dmp@TmedBSD.MCG.EDU
• NACA scoop
  • From: Mike Watson <104437.400@compuserve.com>
• Re: Rotary Engine
  • From: "Al Gietzen" <alventures@email.msn.com>
• rotary engine
  • From: "Al Gietzen" <alventures@email.msn.com>
• 540 installation
  • From: bigbird173RGE@webtv.net (marion sparrow)
• Fwd: Internal Rudder Horns and Winglet Layer "C"
  • From: NMFlyer1@aol.com
• Fwd: Internal Rudder Horns and Winglet Layer "C"
  • From: NMFlyer1@aol.com
• Re: 540 installation
  • From: Alan Shaw <wingco@iu.net>
• Re: fillers
  • From: Alan Shaw <wingco@iu.net>
• Rudder Travel Redux
  • From: DAlexan424@aol.com
• TAXES!!??
  • From: Jeffrey Clough <jclough@gateway.net>
• Re: TAXES!!??
  • From: David Doshay <ddoshay@cisco.com>
• Re: TAXES!!??
  • From: Charles Seberg <C.SEBERG1@worldnet.att.net>
• Taxes
  • From: NMFlyer1@aol.com
• RE: TAXES!!??
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• Taxes
  • From: "Al Gietzen" <alventures@email.msn.com>
• RE: Questions
  • From: Glenn Babcock <babcockg@ao.net>
• Re: Questions
  • From: DAlexan424@aol.com
• Re: Taxes
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Taxes
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Follow up an oil filter
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Finishing and filling.
  • From: "Steven R. Wooden" <Wooden@navix.net>
• Air Scoops
  • From: "Denis D. Miller" <denism@computer.net>
• Re: Rudder Travel Redux
  • From: NMFlyer1@aol.com
• Re: Rudder Travel Redux
  • From: DAlexan424@aol.com
• Re: fillers
  • From: dmp@TmedBSD.MCG.EDU
• Re: TAXES!!??
  • From: "Rob Morgan" <morgan_rob@hotmail.com>
• Re: Finishing and filling.
  • From: Alan Shaw <wingco@iu.net>
• (no subject)
  • From: rdugas@bayou.com
• Re: Air Scoops
  • From: Dave Black <asterisk@idsonline.com>
• Re: Engine
  • From: "Ron Needham" <roncathy@ameritech.net>
• Re: Instruments
  • From: Travis Young <TravisY@onePOS.com>
• RE: Air Scoops
  • From: "Schweitzer, Bill" <bill.schweitzer@tandem.com>
• Re: Air Scoops
  • From: David Doshay <ddoshay@cisco.com>
• Re: Air Scoops
  • From: HYTEC45@aol.com
• Re: Air Scoops
  • From: "Denis D. Miller" <denism@computer.net>
• Re: Air Scoops
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Air Scoops
  • From: aegerter@dataway.ch (Simon Aegerter)
• Air scoops
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Air Scoops
  • From: dmp@TmedBSD.MCG.EDU
• Re: Air Scoops
  • From: DAlexan424@aol.com
• Re: Air Scoops
  • From: Dave Teter <dteter@truetechsys.com>
• Re: Instruments
  • From: ncalvin@primenet.com (nate calvin)
• Re: (no subject)
  • From: Alan Shaw <wingco@iu.net>
• Re: Air Scoops
  • From: Alan Shaw <wingco@iu.net>
• Re: Air Scoops
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• Re: air scoops
  • From: David Doshay <ddoshay@cisco.com>
• RE: Instruments
  • From: Travis Young <TravisY@onePOS.com>
• Re: (no subject)
  • From: mhadley1@juno.com
• Re: Air Scoops
  • From: mhadley1@juno.com
• Fluid Cooling Experiment
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• N6Q Flight test -- 10 hr status report
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• [Fwd: [canard-aviators] Re: COZY: Re: Cylinder Head Temps]
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Exhaust pipes
  • From: Dave Scharfenberg <dave@mail.netins.net>
• [Fwd: Re: N6Q Flight test -- 10 hr status report]
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Fluid Cooling Experiment
  • From: Alan Shaw <wingco@iu.net>
• Terf inc. Ph. #
  • From: bgamm11@juno.com (Robert C Gammon)
• Re: N6Q Flight test -- 10 hr status report
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Instruments
  • From: MTSP@aol.com
• [Fwd: Re: ROTARY PH. #] ..Engine that is
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: N6Q Flight test -- 10 hr status report
  • From: mhadley1@juno.com
• Cape Cod Fly-in
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: N6Q Flight test -- 10 hr status report
  • From: Dave Black <asterisk@idsonline.com>
• Re: N6Q Flight test -- 10 hr status report
  • From: Dave Black <asterisk@idsonline.com>
• Re: N6Q Flight test -- 10 hr status report
  • From: aegerter@dataway.ch (Simon Aegerter)
• wing / strake incidence
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: wing / strake incidence
  • From: HYTEC45@aol.com
• S-Tec 50 Autopilot
  • From: RSalinasP@aol.com
• Re: S-Tec 50 Autopilot
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Autopilot
  • From: HYTEC45@aol.com
• Re: wing / strake incidence
  • From: "William Wade" <billwade@Concentric.net>
• Re: wing / strake incidence
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Fluid cooling experiment
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: S-Tec 50 Autopilot
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: S-Tec 50 Autopilot
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Exhaust Augmentation for Water Cooled Engines
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Radiator size for an SVX
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Re: Autopilot
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: S-Tec 50 Autopilot
  • From: dmp@TmedBSD.MCG.EDU
• Re: wing / strake incidence
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: wing / strake incidence
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Computerized A/C
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re:Exhaust Augmentation for Water Cooled Engines
  • From: David Doshay <ddoshay@cisco.com>
• Re: OSH
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: OSH
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Re: Exhaust Augmentation for Water Cooled Engines
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Panels
  • From: rdugas@bayou.com
• Re: Computerized A/C
  • From: "Venky's Velocity Hangar" <velocity@CC1005790-A.vron1.nj.home.com>
• Re: Computerized A/C
  • From: "Brian K. Michalk" <michalk@awpi.com>
• Navaid altitude hold
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Navaid altitude hold
  • From: Bob Ginsberg <bgins@ipass.net>
• Cabin Heat
  • From: Dave Black <asterisk@idsonline.com>
• N6Q's Phase I flight restriction flown off
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: Autopilot
  • From: mhadley1@juno.com
• Incidence jigs
  • From: mhadley1@juno.com
• Re: Incidence jigs
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: Incidence jigs
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: Computerized A/C
  • From: "James F. Agnew" <RRT0162@IBM.NET>
• Re: Throttle Quadrant
  • From: aegerter@dataway.ch (Simon Aegerter)
• Another big adventure in our Velocity
  • From: lavoie <lavoie@aug.com>
• Re: Another big adventure in our Velocity
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• Re: Another big adventure in our Velocity
  • From: HYTEC45@aol.com
• Throttle Quadrant
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Re: Another big adventure in our Velocity
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Throttle Quadrant
  • From: aegerter@dataway.ch (Simon Aegerter)
• Empire Electronic Ignition
  • From: Malcolm Collier <hangar18@iu.net>
• Ewart Accident
  • From: aegerter@dataway.ch (Simon Aegerter)
• IVOProp
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Velocity West comment on IVOProp
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Simon's Pics Online
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Website for Rocky Mountain Instruments ?
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Archives available
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• No Subject
  • From: No Author
• No Subject
  • From: No Author
• No Subject
  • From: No Author
• No Subject
  • From: No Author
• No Subject
  • From: No Author
• Re: Website for Rocky Mountain Instruments ?
  • From: Greg.Otto@cyrix.com
• Re: Ewart Accident
  • From: Dave Black <asterisk@idsonline.com>
• Want to get on the Velocity Reflector
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Silver Shield of PolyFiber
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Awlgrip primer
  • From: "Donald J. Royer" <droyer@teal.csn.net>
• Re: Fillers
  • From: "Denis D. Miller" <denism@computer.net>
• RE: Awlgrip primer
  • From: Travis Young <TravisY@onePOS.com>
• Marhyde Ultimate Filler/Primer
  • From: David Brown <velcty@earthlink.net>
• Re: Marhyde Ultimate Filler/Primer
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Primer
  • From: rdugas@bayou.com
• SPECIAL DEAL!!! Another pic!
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Empire Electronic Ignition
  • From: PenningSP@aol.com
• Re: Marhyde Ultimate Filler/Primer
  • From: David Brown <velcty@earthlink.net>
• fillers/ frimers
  • From: NMFlyer1@aol.com
• Re: Primer
  • From: Alan Shaw <wingco@iu.net>
• Re: Awlgrip primer
  • From: Alan Shaw <wingco@iu.net>
• Re: Empire Electronic Ignition
  • From: Alan Shaw <wingco@iu.net>
• [Fwd: Re: Velocity]
  • From: Bob Ginsberg <bgins@ipass.net>
• lycoming engs
  • From: bigbird173RGE@webtv.net (marion sparrow)
• Re: lycoming engs
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Electro-Air Electronic Ignition
  • From: PenningSP@aol.com
• Fwd: Electro-Air Electronic Ignition
  • From: MelBina@aol.com
• Re: Marhyde Ultimate Filler/Primer
  • From: Dave Black <asterisk@idsonline.com>
• Re: Attaching your Ailerons to my wings.
  • From: Alan Shaw <wingco@iu.net>
• Re: Marhyde Ultimate Filler/Primer
  • From: Alan Shaw <wingco@iu.net>
• Re: Marhyde Ultimate Filler/Primer
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Marhyde Ultimate Filler/Primer
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Marhyde Ultimate Filler/Primer
  • From: Alan Shaw <wingco@iu.net>
• Salvage Velocity
  • From: David Doshay <ddoshay@cisco.com>
• new Retract Control Box?
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• [Fwd: Marhyde Ultimate Filler/Primer]
  • From: Dave Black <asterisk@idsonline.com>
• Re: Ewart Accident
  • From: Dave Black <asterisk@idsonline.com>
• Re: Ewart Accident
  • From: Alan Shaw <wingco@iu.net>
• Re: new Retract Control Box?
  • From: ncalvin@primenet.com (nate calvin)
• Doh!
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Ewart Accident
  • From: Dave Black <asterisk@idsonline.com>
• navaid autopilot
  • From: "ART DINICOLANTONIO" <ADINICK@worldnet.att.net>
• 24 V Electric System
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Re: 24 V Electric System
  • From: Dave Black <asterisk@idsonline.com>
• Re: 24 V Electric System
  • From: Bob Ginsberg <bgins@ipass.net>
• No Subject
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: 24 V Electric System
  • From: "William Wade" <billwade@Concentric.net>
• fuel vent line
  • From: Juanita Londenberg <juanita@awpi.com>
• Re: 24 V Electric System
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• 24 V Elect.
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Augmentors
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Re: navaid autopilot
  • From: HYTEC45@aol.com
• Re: Augmentors
  • From: David Doshay <ddoshay@cisco.com>
• Augmentor pics
  • From: David Doshay <ddoshay@cisco.com>
• Re: Augmentors
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Augmentor pics
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Pics?
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Augmentors
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Augmentors
  • From: David Doshay <ddoshay@cisco.com>
• More water cooling
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• the Radiator Cooling Article from Canadian RAA
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• Safe airplanes
  • From: Alan Shaw <wingco@iu.net>
• Re: N6Q Trim & Antennas
  • From: Carl Hoffman <hoffman3@erols.com>
• Great X-Country Web Site
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: Safe airplanes
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: fuel vent line
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: N6Q Trim & Antennas
  • From: Dave Black <asterisk@idsonline.com>
• Re: Augmentors
  • From: dmp@TmedBSD.MCG.EDU
• nose down
  • From: Alan Shaw <wingco@iu.net>
• Elevator Trim Up at cruise.
  • From: Mike Watson <104437.400@compuserve.com>
• Re: Augmentors
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• <NO SUBJECT>
  • From: CHARLES_FREELAND.parti@ecunet.org (CHARLES FREELAND)
• RE: fuel vent line
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• water cooling ( was Re: Augmentors)
  • From: David Doshay <ddoshay@cisco.com>
• Re: 24 V Electric System
  • From: mhadley1@juno.com
• Re: navaid autopilot
  • From: "ART DINICOLANTONIO" <ADINICK@worldnet.att.net>
• RE: navaid autopilot
  • From: Lisa Boesen & Chuck Caldarale <n828cl@ix.netcom.com>
• Re: nose down
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Temperatures
  • From: Mike Watson <104437.400@compuserve.com>
• Oshkosh composite pavilion
  • From: charles wilhite <cwilhite@smart.net>
• circuit breaker/switches
  • From: RGVelocity@aol.com
• RAdiator fans.
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• H2o cooled engine
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Re: RAdiator fans and H2o cooled engine
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Temperatures
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Temperatures
  • From: Alan Shaw <wingco@iu.net>
• Re: H2o cooled engine
  • From: dmp@TmedBSD.MCG.EDU
• Re: RAdiator fans and H2o cooled engine
  • From: dmp@TmedBSD.MCG.EDU
• Re: RAdiator fans and H2o cooled engine
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: H2o cooled engine
  • From: DAlexan424@aol.com
• Radiator
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Exhaust &
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• CONTACT Magazine for Auto-Conversions
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Back from Flying Adventure!
  • From: lavoie <lavoie@aug.com>
• Cape Cod Fly-in
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Fuselage transport
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Elite door seal tip?
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Fuselage transport
  • From: David Brown <velcty@earthlink.net>
• Re: [canard-aviators] CONTACT Magazine for Auto-Conversions
  • From: "Ernesto Sanchez" <es12043@utech.net>
• Standard/Franklin
  • From: Mike Watson <104437.400@compuserve.com>
• Re: Fuselage transport
  • From: dmp@TmedBSD.MCG.EDU
• Re: Exhaust &
  • From: dmp@TmedBSD.MCG.EDU
• Re: Fuselage transport
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• New Door Pivots
  • From: ncalvin@primenet.com (nate calvin)
• Fuselage transport
  • From: Mike Watson <104437.400@compuserve.com>
• RE: Fuselage transport
  • From: Travis Young <TRAVISY@APPLEBEES.com>
• Re: Fuselage transport
  • From: HYTEC45@aol.com
• Update on CONTACT magazine info
  • From: Jeff Barnes <jcbarnes@ibm.net>
• RE: Exhaust &
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Re: New Door Pivots
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• New Door Pivots
  • From: rdugas@bayou.com
• Re: fuselage transport
  • From: NMFlyer1@aol.com
• Red Line Oil's "Water Wetter"
  • From: john daniel cowan <jdcowan@mail.telis.org>
• Liquid cooling
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Dragonaero rotary
  • From: "Al Gietzen" <alventures@email.msn.com>
• Neutral Point
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Re: RAdiator fans and H2o cooled engine
  • From: dmp@TmedBSD.MCG.EDU
• RE: Exhaust &
  • From: dmp@TmedBSD.MCG.EDU
• Re: 400 hp at 2900 rpm (was "Water Wetter")
  • From: David Doshay <ddoshay@cisco.com>
• RE: Exhaust &
  • From: "Laurence W. Coen" <lwcoen@freewwweb.com>
• Millenium Engine
  • From: Peter Beaty <PETER.J.BEATY@usa.dupont.com>
• Millenium Engine
  • From: Peter Beaty <PETER.J.BEATY@usa.dupont.com>
• Elevator Trim Tab
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Velocity for X-plane
  • From: David Doshay <ddoshay@cisco.com>
• Re: Neutral Point
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Re: Elevator Trim Tab
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Re: New Door Pivots
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Incidence gauges
  • From: DAlexan424@aol.com
• A great little tool for mixing epoxy and bubbles
  • From: DAlexan424@aol.com
• Rudder deflection
  • From: DAlexan424@aol.com
• Re: Millenium Engine
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Millenium Engine
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: A great little tool for mixing epoxy and bubbles
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Elevator Trim Tab
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Elevator Trim Tab
  • From: HYTEC45@aol.com
• Re: Elevator Trim Tab
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Millenium Engine
  • From: Peter Beaty <PETER.J.BEATY@usa.dupont.com>
• Re: Millenium Engine
  • From: Peter Beaty <PETER.J.BEATY@usa.dupont.com>
• RE: Incidence gauges
  • From: "Travis Young" <TravisY@onepos.com>
• Re: New Door Pivots
  • From: ncalvin@primenet.com (nate calvin)
• RE: Incidence gauges
  • From: "Schweitzer, Bill" <bill.schweitzer@TANDEM.com>
• RE: A great little tool for mixing epoxy and bubbles
  • From: "Travis Young" <TravisY@onepos.com>
• Oskosh
  • From: rdugas@bayou.com
• Re: Oskosh
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Oskosh
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: Millenium Engine
  • From: "James F. Agnew" <JFAgnew@IBM.NET>
• RE: Incidence gauges
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: Incidence gauges
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Fuel Filters
  • From: David Brown <velcty@earthlink.net>
• Re: Elevator Trim Tab
  • From: David Brown <velcty@earthlink.net>
• Re: Fuel Filters
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Millenium Engine
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Elevator Trim Tab
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Elevator Trim Tab
  • From: mhadley1@juno.com
• Re: Elevator Trim Tab
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Fwd: Millenium Engine
  • From: PenningSP@aol.com
• Re: Fuel filter
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Hmmmazda
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Electric Trim?
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• Re: Fuel filter
  • From: "James F. Agnew" <JFAgnew@IBM.NET>
• Insurance nightmare
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Incidence gauges
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• Re: Fuel filter
  • From: HYTEC45@aol.com
• Re: Insurance nightmare
  • From: HYTEC45@aol.com
• Re: Insurance nightmare
  • From: DAlexan424@aol.com
• Re: Incidence gauges
  • From: DAlexan424@aol.com
• RE: Insurance nightmare
  • From: "Lisa Boesen & Chuck Caldarale" <n828cl@ix.netcom.com>
• auto Engine
  • From: "Ron Needham" <roncathy@ameritech.net>
• Electronic ignition
  • From: Dave Scharfenberg <dave@netins.net>
• Re: Incidence gauges
  • From: Dave Black <asterisk@idsonline.com>
• Re: Insurance nightmare
  • From: Dave Black <asterisk@idsonline.com>
• Re: Insurance nightmare
  • From: Bob Ginsberg <bgins@ipass.net>
• RG bushing KPC
  • From: David Brown <velcty@earthlink.net>
• Re: Insurance nightmare
  • From: Mel Ball <mball@frontier.net>
• Re: RG bushing KPC
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Liquid cooling
  • From: Alan Shaw <wingco@iu.net>
• Re: Standard/Franklin
  • From: Alan Shaw <wingco@iu.net>
• Re: Insurance nightmare
  • From: "William Wade" <billwade@Concentric.net>
• Re: New Door Pivots
  • From: ncalvin@primenet.com (nate calvin)
• Obvious???
  • From: HYTEC45@aol.com
• Self Insurance
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: Obvious???
  • From: Bob Ginsberg <bgins@ipass.net>
• Re: Stec 30 install
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: Self Insurance
  • From: Alan Shaw <wingco@iu.net>
• NTSB would like to examine the official PZL supplied Franklin fuel pump
  • From: "James F. Agnew" <JFAgnew@IBM.NET>
• Re: NTSB would like to examine the official PZL supplied Franklin fuel pump
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• new builder, start where on reflector?
  • From: CBrock5000@aol.com
• Re:First Flight
  • From: "Scott & Glema" <Keighan@computan.on.ca>
• Re: First Flight
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Canard Installion Sequence
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Re: Canard Installion Sequence
  • From: Dave Black <asterisk@idsonline.com>
• Re: Canard Installion Sequence
  • From: "William Wade" <billwade@Concentric.net>
• Re: Stec 30 install
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: First Flight
  • From: HYTEC45@aol.com
• Relaxing your Elite Doors
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Sanding, How Much 4 Attachments?
  • From: CBrock5000@aol.com
• Re: [canard-aviators] Re: Conductive fiberglass
  • From: Dave Black <asterisk@idsonline.com>
• Re: Sanding, How Much 4 Attachments?
  • From: Alan Shaw <wingco@iu.net>
• Mild aerobatics, serious aromatics
  • From: "Al Gietzen" <alventures@email.msn.com>
• Annual Inspection
  • From: Mel Ball <mball@frontier.net>
• Gloves and hand protection
  • From: David Doshay <ddoshay@cisco.com>
• Sanding, How Much 4 Attachments?
  • From: DAlexan424@aol.com
• RE: Mild aerobatics, serious aromatics
  • From: "Lisa Boesen & Chuck Caldarale" <n828cl@ix.netcom.com>
• Difference #30 drill bit v. 1/8" bit? 100deg countersink supplier?
  • From: CBrock5000@aol.com
• N55AJ FGE weight numbers
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• RE: Difference #30 drill bit v. 1/8" bit? 100deg countersink supplier?
  • From: "Lisa Boesen" <n828cl@ix.netcom.com>
• Geoclock
  • From: Dave Black <asterisk@idsonline.com>
• Re: Sanding, How Much 4 Attachments?
  • From: HYTEC45@aol.com
• Re: Sanding, How Much 4 Attachments?
  • From: Alan Shaw <wingco@iu.net>
• Re: Sanding, How Much 4 Attachments?
  • From: CBrock5000@aol.com
• Stainless exhaust
  • From: David Brown <velcty@earthlink.net>
• Re: Stainless exhaust
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Elevators
  • From: "Steven R. Wooden" <Wooden@navix.net>
• Re: Elevators
  • From: DAlexan424@aol.com
• Position lights and strobes.
  • From: DAlexan424@aol.com
• Speed Brake Installation
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• RE: Position lights and strobes.
  • From: "Lisa Boesen & Chuck Caldarale" <n828cl@ix.netcom.com>
• RE: Elevators
  • From: "Lisa Boesen & Chuck Caldarale" <n828cl@ix.netcom.com>
• Re: Speed Brake Installation
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Speed Brake Installation
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• Re: Speed Brake Installation
  • From: "William C. Cox" <bcox@wrs.com>
• Re: Position lights and strobes.
  • From: David Brown <velcty@earthlink.net>
• Re: Position lights and strobes.
  • From: aegerter@dataway.ch (Simon Aegerter)
• Hand protection
  • From: "Al Gietzen" <alventures@email.msn.com>
• FW: Position lights and strobes.
  • From: "Lisa Boesen & Chuck Caldarale" <n828cl@ix.netcom.com>
• RE: Rolls
  • From: "Lisa Boesen & Chuck Caldarale" <n828cl@ix.netcom.com>
• Re: Speed Brake Installation
  • From: Alan Shaw <wingco@iu.net>
• Epoxy - auto fuel compatability
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Rolls
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: Position lights and strobes.
  • From: DAlexan424@aol.com
• My appologies to Alan Shaw
  • From: DAlexan424@aol.com
• Re: Position lights and strobes.
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: My appologies to Alan Shaw
  • From: Alan Shaw <wingco@iu.net>
• Re: Epoxy - auto fuel compatability
  • From: Alan Shaw <wingco@iu.net>
• Re: Position lights and strobes.
  • From: Alan Shaw <wingco@iu.net>
• Re: Position lights and strobes.
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: Position lights and strobes.
  • From: HYTEC45@aol.com
• [Fwd: Rolls]
  • From: Alan Shaw <wingco@iu.net>
• Great Wings
  • From: CBrock5000@aol.com
• Re: Great Wings
  • From: aegerter@dataway.ch (Simon Aegerter)
• Re: Great Wings
  • From: Dave Black <asterisk@idsonline.com>
• Re: Epoxy - auto fuel compatability
  • From: "lawrence epstein" <ljepstein@hotmail.com>
• Re: Great Wings
  • From: Alan Shaw <wingco@iu.net>
• Re: Epoxy - auto fuel compatability
  • From: Peter Beaty <PETER.J.BEATY@usa.dupont.com>
• Great Wings!
  • From: bigbird173RGE@webtv.net (marion sparrow)
• RE: Great Wings!
  • From: "Travis Young" <TravisY@onepos.com>
• Re: Great Wings!
  • From: Peter Beaty <PETER.J.BEATY@usa.dupont.com>
• Crooked firewall
  • From: "R. Wayne Owens" <wamowens@bellsouth.net>
• RE: Crooked firewall
  • From: "Travis Young" <TravisY@Applebees.com>
• Re: Great Wings!
  • From: Alan Shaw <wingco@iu.net>
• Great Wings
  • From: bigbird173RGE@webtv.net (marion sparrow)
• RE: Crooked firewall
  • From: David Brown <velcty@earthlink.net>
• Re: [canard-aviators] O2
  • From: "lawrence epstein" <ljepstein@hotmail.com>
• Re: Crooked firewall
  • From: Dave Black <asterisk@idsonline.com>
• Fixed Prop Search
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: Fixed Prop Search
  • From: Dave Black <asterisk@idsonline.com>
• Want to take a look at a very small and nice alternator
  • From: "James F. Agnew" <Jim_Agnew@IBM.NET>
• props
  • From: RGVelocity@aol.com
• Approximate Build Times?
  • From: CBrock5000@aol.com
• vortilon attach
  • From: David Brown <velcty@earthlink.net>
• No Subject
  • From: No Author
• Re: vortilon attach
  • From: Alan Shaw <wingco@iu.net>
• Re: Cleaning out my files
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: PolyFiber system
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Re: First Flight
  • From: "Scott & Glema" <Keighan@computan.on.ca>
• 96HV
  • From: Dave Black <asterisk@idsonline.com>
• Vortilons
  • From: David Brown <velcty@earthlink.net>
• Re: Crooked firewall
  • From: aegerter@dataway.ch (Simon Aegerter)
• Fuel Quantity Gauge
  • From: Eung Tai Kim <eungkim@kari.re.kr>
• Re: Fuel Quantity Gauge
  • From: Dave Black <asterisk@erols.com>
• Re: Fuel Quantity Gauge
  • From: "James K. Glindemann" <jglind@netspace.net.au>
• Re: Fuel Quantity Gauge
  • From: "Brian K. Michalk" <michalk@sisko.awpi.com>
• Fuel Gauges
  • From: "Dennis Peterson (MP)" <dpeterson@mnpower.com>
• Re: Fuel Quantity Gauge
  • From: Dave Black <asterisk@erols.com>
• Re: Fuel Quantity Gauge
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: Fuel Quantity Gauge
  • From: Carl Hoffman <hoffman3@erols.com>
• Re: Fuel Quantity Gauge
  • From: HYTEC45@aol.com
• Hugh Hyde
  • From: mhadley1@juno.com
• Re: Hugh Hyde
  • From: "James F. Agnew" <Jim_Agnew@IBM.NET>
• Re: Hugh Hyde
  • From: Jeff Barnes <jcbarnes@ibm.net>
• Re: Hugh Hyde
  • From: "William Wade" <billwade@Concentric.net>
• Re: Hugh Hyde
  • From: "William Wade" <billwade@Concentric.net>
• Re: Hugh Hyde
  • From: mhadley1@juno.com
• oil cooler
  • From: Milton Mersky <miltonm@onramp.net>
• Halon
  • From: aegerter@dataway.ch (Simon Aegerter)
• Pre-wired Electrical Systems
  • From: mhadley1@juno.com
• Re: Halon
  • From: "William Wade" <billwade@Concentric.net>
• OSH' 98
  • From: ncalvin@primenet.com (nate calvin)
• Re: Halon
  • From: David Doshay <ddoshay@cisco.com>
• Re: Halon
  • From: DAlexan424@aol.com
• skytec starter story
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Halon; A chemist's perspective
  • From: "Donald J. Royer" <droyer@teal.csn.net>
• Re: skytec starter story
  • From: "James F. Agnew" <Jim_Agnew@IBM.NET>
• elite door spring locks
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Nylo Flow Tubeing
  • From: "Ron Needham" <roncathy@ameritech.net>
• Re: Reflector
  • From: "Al Gietzen" <alventures@email.msn.com>
• Re: Halon; A chemist's perspective
  • From: Dave Black <asterisk@erols.com>
• Re: Reflector
  • From: Alan Shaw <wingco@iu.net>
• Re: Halon
  • From: aegerter@dataway.ch (Simon Aegerter)
• LASAR trick(s)
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Halon
  • From: "Donald J. Royer" <droyer@teal.csn.net>
• Re: LASAR trick(s)
  • From: DAlexan424@aol.com
• At Oshkosh, Visit NOAA in the Federal Building
  • From: "Tim Crawford" <crawford@atdd.noaa.gov>
• Re: Nylo Flow Tubeing
  • From: Bob Ginsberg <bgins@intrstar.net>
• Re: elite door spring locks
  • From: Dave Black <asterisk@erols.com>
• Re: Nylo Flow Tubeing
  • From: Dave Black <asterisk@erols.com>
• Remote Option
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Re: Hugh Hyde
  • From: dmartin@cougar.netutah.net (Dennis Martin)
• Getting out after a crash
  • From: Joe Stack <joestack@technologist.com>
• Re: Getting out after a crash, rudder conduit
  • From: "William Wade" <billwade@Concentric.net>
• Re: Getting out after a crash
  • From: mhadley1@juno.com
• Re: Getting out after a crash
  • From: "Venky's Velocity Hangar" <velocity@CC1005790-A.vron1.nj.home.com>
• Crash and Smoke PREVENTION
  • From: Alan Shaw <wingco@iu.net>
• Canard
  • From: "David Rene' Dugas" <rdugas@bayou.com>
• Re: Canard
  • From: mhadley1@juno.com
• Re: crash and smoke PREVENTION
  • From: "Andrew L. Judge" <AJudge1@compuserve.com>
• Re: Canard
  • From: Alan Shaw <wingco@iu.net>
• Re: Getting out after a crash, rudder conduit
  • From: "Bob Kuc" <kucb@ix.netcom.com>
• Re: elite door spring locks
  • From: "Scott & Glema" <Keighan@computan.on.ca>
• Re: oil cooler
  • From: "ART DINICOLANTONIO" <ADINICK@worldnet.att.net>
• Velocity vs SQ2000
  • From: gpoole@zeta.org.au (Mr Greg Poole)
• oil coolers
  • From: Bob Ginsberg <bgins@intrstar.net>
• Re: Velocity vs SQ2000
  • From: "Venky's Velocity Hangar"